Home > > >

Horizontal Linear Boring and Honing Machine

Xian,Shanxi,China

CCCME Member

Recommended by CCCME

Horizontal Linear Boring and Honing Machine

Horizontal linear boring & honing machine LBH-50

1. Motor assembly :The power part of the machine is used to drive the honing rod for rotation

2. Motor support :For placement of the motor and the gearbox ;

3. Indicating light for cooling oil pump

4. Cooling oil pump switch ;

5. Stroke stop :Used to adjust the stroke of the honing rod ;

6. Hardwood seat :For shelving and placing the honing rod ;

7. Oil pipe retaining ring :Spray the oil to the left or right for cooling of the spray nozzle, turn on/off the spray nozzle ;

8. Oil control valve assembly :Control the flow of cooling oil ;

9. Oil pipe holder :Oil pipe loop ;

10. Lifting handle :Rotate the handle to move the table up and down ;

11. Upper oil tray :Collect the coolant oil on the honing rod ;

12. Door sheet :Keep the coolant from splashing ;

13. Screw :Press the work-piece ;

14. Clamp nut :Clamp the work-piece ;

15. Fixture beam :Worktable, mount the work-piece ;

16. Press plate :Press the work-piece ;

17. Cylinder support :For clamping of , engine parts ;

18. Oil pipe press plate :Adjust the oil pipe up and down ;

19. Lower oil tray :Collect the coolant from the honing rod .

Working range	46~178 mm
Spindle speed	150 rpm
Power of spindle motor	1.5 KW
Power of cooling oil pump	0.12 KW
Working cavity (L * W * H)	1140710710 mm
Physical dimensions of the machine (L * W * H)	320014801920 mm
Max. stroke length of the spindle	660 mm
Min. amount of coolant	130 L
Max. amount of coolant	210 L
Machine weight(without load)	670 kg
Gross weight of the machine	800 kg