double output paper doily machine

• 可通過更換模具製作各種形狀和大小的杯圍、通花底紙、餐墊紙，如圓形、橢圓形、正方形、長方形、心形等。它工作效率高，產生美麗和精細的圖案。
• 整個機器控製係統采用日本三菱PLC和伺候控製係統，保證了機器的控製係統的穩定性，通過合理的程序控製是機器動作運行平穩，各個工序合理銜接，緊密配合，合理的將製作通花底紙模切壓花、廢紙碎清理、切邊整理在此機器上全部完成；
• 使用45-300g的純白紙。
• 最大加工花底紙長度460*寬度350mm
• 變頻器調速，鋼模轉速每分鍾0-72轉
• 模具重新組合設計，可節約原材料10-20%左右
• 做多上紙卷數1--5卷
• 最大原紙直徑小於或等於1000mm
• 最大原紙寬度小於或等於450mm
• 加工圓紙花底紙8.5英寸（216mm）-----72000張/小時
• 整機功率小於12kw
• 電源電壓---AC380V 50HZ

Molds can be changed for making doilies, paper coasters, baking cups with different shapes and sizes, like round, oval, square, rectangle, heart, etc. It works high efficiently, producing beautiful and fine patterns. 

The machine control system USES the Japanese mitsubishi PLC and serve control system, guarantee the stability of the control system of the machine, through the reasonable process control is a machine action smooth operation, each process reasonable cohesion, close coordination, reasonable will make sense to spend the bottom paper die-cutting embossing, waste ground cleaning, cutting and finishing on the machine is complete;

● use 45-300g plain white paper.

● the maximum length of processing flower base paper 460* width 350mm

● frequency converter speed regulation, steel mold speed per minute 0-72

● mold recombination design, can save about 10-20% of raw materials

● do more paper number 1- 5 rolls

● the maximum diameter of raw paper is less than or equal to 1000mm

● the maximum width of raw paper is 450mm or less

● round paper base paper 8.5 in. (216mm) --72000 sheets/hour

● the power of the whole machine is less than 12kw

● power supply voltage --AC380V 50HZ

CNTIC NANFANG IMPORT & EXPORT COMPANY

Free Member 0 Chinese Supplier

Recommended by CCCME